Access the Login page of Bros trend extender, follow the beneath steps.

After installation, you can log in to the extender.

• Firstly connect Bros Trend AC1200 to router it’s essentially in Access Point mode.
• And it will rebroadcast the router SSID and any device can log in with the password.
• The range will depend on distance, how thick the walls are, other wireless signals, and so on.
• Moreover to get a wide-range signal connect an Ethernet cable and the run to the unit which broadcast a Wi-Fi signal.
• Furthermore, this is a great option when boosting the router signal is not enough.

For example, a detached garage that is far away from a home can have an Ethernet cable run to the router and attached to the Bros Trend AC1200 which will act as an access point.

Access the Login page of Bros trend extender is done.

Connect via WPS

1. Firstly press the WPS button on the extender. The WPS LED blinks.
2. Meanwhile press the button on router within two minutes.
3. If you see the LED turns to solid green that indicates the good connection between the router and extender.
4. Then, if your Wi-Fi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz band.
5. Now, unplug extender and relocate it mid-way between the router and the place you want to extend the network.
6. Further follow the Router LED to choose a spot where the extender-to-router connection is favorable.
7. Moreover if the Router LED doesn’t turn to amber or green, then place your extender near to router and try again. And move until the LED turns to solid green or amber.
8. On your computer or mobile device, find and connect to a new extender Wi-Fi network.