Bros Trend Extender Archives - Brostrend Extender Setup

Connect Google home mini with Bros Trend Wi-Fi network

Post category:Bros Trend Extender
Post comments:0 Comments

How to Connect Google home mini with Bros Trend Wi-Fi network. First of all make sure that you have the accompanying at hand:

The latest version of the Google Home App
A Google account
An Android or iOS device
Name and password of your wireless network

To connect your Google Home Mini to Bros Trend Wi-fi make sure that you have just downloaded the Google Home application – this should be possible via the App Store for iOS or Google Play for Android devices.

Firstly, Open the Google Home App on your Android or iOS device.
Secondly, choose or enter the Google account that you have to associate your Google Home device to. Enable Bluetooth if energized by the App.
The Google Home App ought to have now perceived your new Google Home Device. Select > Next.
Moreover, the speaker will currently play a sound. When you hear this sound, tap > Yes.
Choose the room or location where your Google device is located.
After that, enter a unique name for your Google Speaker.
Select the Bros Trend Wi-Fi network that you might need to connect your Google Home to from the list displayed. Click > Next.
Furthermore, Enter the Bros Trend Wi-Fi network password and select > Connect. You should now be associated with your Google Home device.

**Connect Google home mini with Bros Trend Wi-Fi network**

How to change the Wi-Fi network on your Google Home Mini:

You have to change the Wi-Fi network on your Google device? Or on the other side you have to re-join a current network with an updated password? To do both things, You have follow the steps underneath:

Firstly, to begin, make sure that your mobile or tablet is associated with a similar Bros Trend Extender Wi-Fi as your Google Home Mini.
Secondly, Open the Google Home App on your mobile or tablet device.
Then, Tap on your Google device that you have to associate with Bros Trend Wi-Fi, from the list that should now be showing.
Tap Settings > Bros Trend Wi-Fi > Forget Network.
After that you have affirmed to ‘Forget Network’, you will be re- coordinated to the Google Home App Home screen.
Moreover, you can set up your device on a new Wi-Fi network by following the ‘set up’ steps below:

How to set up your Google device:

Firstly, Select Add set up device set up new devices in your home.
Then, after the application has scanned for nearby Google Home devices, it will prompt you to explore to your mobile or tablets Bros Trend Wi-Fi settings and associate with the Google Home hotspot. This hotspot should display within the Bros Trend Wi-Fi network list.
After this, return to the application. The speaker will now play a sound at the point when you hear this sound, tap > Yes.
Choose the room or location where your Google device is located.
Choose the Wi-Fi network you have to associate to your device. Type the Wi-Fi network password and select Connect.
At last, now be associated with our Google Home device.

Issues-

Google Home Mini can’t connect to Bros Trend Wi-Fi:

Ensure that it is connected properly: Your Google Home Mini won’t work except you have manually connected it to Bros Trend Wi-Fi utilizing the Google Home application.

If you haven’t installed the app as of now, you can download it with the App Store for iOS or Google Play for Android devices.

Move your router or Google Home device: Your router acts as the broker between your Google Home device and the web, Make sure that it is in a position relatively close to permit a solid association. Move your Google Home device nearer to your router to check whether the association improves.
Restart the router and Google Home device: Restarting both the Router and Google Home device may dispose of any issue you are experiencing. You can restart your Google Home device within the Google Home App. Tap the device you want to restart > Select Settings > Select Three Dot Menu > Tap Reboot.
Ensure that your Bros Trend Wi-Fi password is correct: It is a typical issue while associating your Google device to Bros Trend Wi-Fi. Make sure that the password you are using is right; try connecting an alternate device to Bros Trend Wi-Fi with a similar password.
Try resetting your Google Home Mini to factory settings: A factory reset will reset your Google device to its default factory settings. To processing plant reset you’re Google Home Mini: Press down and hold the factory reset button which can be found underneath the power cord on the bottom of the Mini. Just hold up for around 15 seconds. You should have the option to then hear your Google Assistant affirm that it’s resetting. It’s important to remember that you can’t use your voice or the Home app to processing factory reset your device, this must be done manually.

Alexa with Bros Trend Extender

Post category:Bros Trend Extender
Post comments:0 Comments

For connecting Alexa with Bros Trend Extender, First of all you have to setup Bros Trend Wi-Fi extender. Here are some steps to follow.

Firstly ensure that you have the SSID and password of the main Wi-Fi router. Then plug in the https://re-brostrend.com/ to the power outlet.

When the setup is completed then by typing either 192.168.0.254 or https://re-brostrend.com/ look for the default IP address of the extender.
After this fill in the login details by adding admin and password then available networks will be appears on the screen & select the main network from the accessible networks.
Then you have to follow the instructions which will appears on the page & by doing so, the extender will be associated to the router successfully.

Once the Bros Trend Wi-Fi extender setup is completed then you can associate your extender with Alexa. For this, you first have to Amazon Alexa & you can find it on alexa.amazon.com. Before starting the procedure, Plugin your Amazon Alexa to the power outlet then open the Alexa App.

Steps of Alexa with Bros Trend Wi-Fi extender setup:

Firstly, open the settings from the navigation panel of Alexa App then set up a new device.
After that press and hold the action button for some seconds until the light starts flickering after this & then your mobile phone or tablet will connect to Alexa.
Moreover, a list of Wi-Fi networks will show on your Alexa app.
You have to select the modem’s Wi-Fi network. The name & password of the modem’s Wi-Fi network will show on modem/router then enter the password.
Furthermore, In case, your modem’s Wi-Fi network is not visible to you then scroll down & re-scan.
At last, connect it if the network visible to you. After the association, you will get the confirmation message & you are good to go for using Alexa.

Setup Brostrend Mesh WiFi System

Post category:Bros Trend Extender
Post comments:0 Comments

This article is about “Setup Brostrend Mesh Wi-Fi system” The customary routers, Brostrend Home WiFi System design an MU-MIMO Wi-Fi. Also has concurrent dual-band 2.4GHz & 5GHz and provide speed up to 1167Mbps. At a same rate and time it can transfer the data to multiple devices. For gaming experience you can enable smart QoS functions.

Setup the primary mesh node

The first node you set up functions as the essential node, while the rest areas the secondary nodes. If it’s not too much trouble power on one Mesh first connects the other Mesh after you set the first Mesh to the internet on the Apps.

First, make sure to turn off your modem and exile its battery.
Then with Ethernet cable connect a LAN port of your modem. This node is the primary node.
Now reinsert the battery and turn on your modem.
Further with the connector to connect the basic node to power source, here you will see LED turns to green and shine rapidly.
Now wait for about 40 seconds to complete the setup till the LED turn to green slowly.

Setup Brostrend Mesh WiFi System — Brostrend Mesh WiFi

Connect the primary node to the internet

Firstly, visit to Wi-Fi network list from your device and select your SSID and enter its password.
Here SSID and password are set on the bottom label of node.
Now open the wifi App and stick to on screen instructions to address the essential node to web.

Once the essential node is connected with web, you will see the LED turns to solid green.

Setup the first Brostrend mesh node on App

First open the Wi-Fi app and then setup wizard displays, click on “setup”.
Here recognizes your web association and enter data as instructed by web association type and click to “Next”.
Then work unit is connected with web and the app continues to following stage.
In case your Internet connection type is PPPoE, then enter your PPPoE user name and password and click “Next”.
In case your web connection type is dynamic IP, click “Next”.
Now set mesh unit wireless network name and password and click “OK”.

Once you see the LED of mesh unit turns to solid green that means your mesh unit is successfully connected with the web.

Connect the secondary Brostrend nodes to the internet

Firstly notice your all node must be at high and at open territory.
Also ensure the wall in between any two nodes must be less than two.
And confirm that your node must be far from electronics. Example microwave oven, induction cooker and refrigerator.
Here use other power adapters to connectors to connect the left secondary nodes to wall socket; you will see LED light to solid green.
Now hold on 40 second and your secondary node is connected with another node then LED turn to flickers green.
Led status if you see the LED turns to solid green that means your connection is good. If your LED turns to solid yellow that means your connection is fair. If your LED turns to solid red that means you are disconnected.

Bros Trend Extender Setup

Post category:Bros Trend Extender Bros Trend Extender Setup
Post comments:0 Comments

Bros Trend AC1200 extender is a wireless Wi-Fi extender that helps in eliminating dead spots at your workplace. One can simply connect the extender with the existing network. It has the good class display design. It contain of numerous features that create this extender different.

This extender comes up with many attributes which are as follows:

Permanent Signal Connection.
Complete Signal Coverage.
Compatible with every sort of router.

You can locate a definite place just with the assist of the smart signal indicator. You can connect the extender through Graphical User Interface (GUI) or WPS connection. Bros Trend wireless extender supports the dual-band technology that is 2 GHz to 5 GHz. It has a warranty which is a good thing for customers. Let’s begin the Bros Trend Extender setup:

Firstly to begin the setup, you have the SSID and Wi-Fi password of the main router network. Then you require plugging in the re.brostrend.com to the working power outlet.
Then, joining the setup, open any internet browser in your device and search for the default IP address by typing 192.168.10.1 or re.brostrend.com
After that login by write admin as the password and after this the device will perform a scan for the networks accessible. Out of these networks, choose the main Wi-Fi network.
At last follow the guidance given on the page through which the extender will be connected to the router network successfully.

You can also call on the Technical Support helpline for further assistance.

This extender comes up with many attributes which are as follows:

Permanent Signal Connection.
Complete Signal Coverage.
Compatible with every sort of router.

You can locate a definite place just with the assist of the smart signal indicator. You can connect the extender through Graphical User Interface (GUI) or WPS connection. Bros Trend wireless extender supports the dual-band technology that is 2 GHz to 5 GHz. It has a warranty which is a good thing for customers. Let’s begin the Bros Trend Extender setup:

Firstly to begin the setup, you have the SSID and Wi-Fi password of the main router network. Then you require plugging in the re.brostrend.com to the working power outlet.
Then, joining the setup, open any internet browser in your device and search for the default IP address by typing 192.168.10.1 or re.brostrend.com
After that login by write admin as the password and after this the device will perform a scan for the networks accessible. Out of these networks, choose the main Wi-Fi network.
At last follow the guidance given on the page through which the extender will be connected to the router network successfully.

You can also call on the Technical Support helpline for further assistance.

Bros Trend Extender setup via WPS

Connect to the main router with the simple method to use the WPS button. This method uses the WPS button on the router and the Wi-Fi extender to quickly connect the two. Every router is different and not all routers are same or it may need to be turned on in the router settings.

WPS Setup Steps

Firstly, power on the unit and just hold up for the Power LED to turn blue.
Then, press the WPS button on the router.
After that press the WPS button on the Bros Trend AC1200.
Just hold up for the Signal LED to turn solid blue.
When it turns solid blue it is begin to use.

How to Connect to Router manually

On the off chance the WPS method above does not work for you logging into the unit manually can also be done.

Firstly, plug-in the unit powering it on
And open Wi-Fi settings and connect to BrosTrend_EXT
Then, open a Browser and write in 192.168.0.254
After that create a Password.
Find your router and select it.
After this enter the router Wi-Fi password.
It shows Extended Successfully!
At last you can log into the BrosTrend AC1200 on the 5G_EXT or 5G_5GEXT

Bros Trend Extender

Post category:Bros Trend Extender
Post comments:0 Comments

The Bros Trend Extender is greatly improving the wireless in a home. It can boost a wireless signal, be an access point, extend Wi-Fi, or add Wi-Fi to non-wireless devices. The Wi-Fi range extenders add an access point to a location or add Wi-Fi to an Ethernet-only device for example a smart TV of gaming console. It is a simple device built to assist improves or add Wi-Fi in many numerous wireless environments.

Features of Bros trend extender

Bros Trend Wi-Fi Range Extending Technology

Wi-Fi booster range extender boosts and conveys superior wireless signal coverage throughout your house. Also conveys good wireless range than Wi-Fi extenders with internal antennas.

Dedicated Network CPU Handles 1200Mbps Speed at Ease

Ideal for lag-free online HD video streaming, multi-users gaming, voice-calling, and browsing etc.

· Wi-Fi with 4 X Speed

It conveys 4 times speed as that of N300 or nearly 2 times as that of AC750, push your wireless range to the extreme without upgrading any existing equipment by adding this 1200Mbps dual band Wi-Fi booster.

· Works with Any Wi-Fi Routers

It has to connect any of your Wi-Fi devices to the extended Internet network, for example your smart phone, tablet, TV, game console, and streaming players etc

· WI-Fi Bridge – Connect Wired Device to Wi-Fi

Upgrade your wired entertainment device to AC Wi-Fi speed in a single shot with this dual band Wi-Fi extender booster.

· Access Point Mode – Create another Wi-Fi Network

It has use Ethernet cable to connect this Wi-Fi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router; you can make a new AC1200 dual band wireless network.

It also has two small adjustable Wi-Fi antennas to get a better signal.

Firmware update of Bros Trend Extender

Firmware update of Bros Trendextender should be possible by login on the extender page. You can access the page using the IP address allotted by the router (Note- 192.168.0.254 or re.brostrend.com). On the off chance that if you don’t know how access the login page after installation. When you login on the Setup page you have to click on “Administration” option.

Firstly, under the Administration choose the option Firmware update.
And then you have to locate the file for latest Firmware on your PC.
After that click Install and it will take some minutes to upgrade the firmware.
During the Update your Bros trend extender will reboot, Ensure don’t turn of the power, or else there is chance of malfunction.

Note- Download the Bros trend Extender firmware from the official website.

Bros trend extender with Firestick

Post category:Bros Trend Extender
Post comments:0 Comments

In this article we discuss about how to connect Bros Trend extender with Firestick. Once you associate the Bros Trend extender with the Main router. You need the regular Wi-Fi password or if you setup a custom password for the Extended Wi-Fi, you should use that too.

Steps to Connect Bros Trend extender with the Amazon Firestick-

In the Firestick Menu you have to navigate to the “Setting” option. To see how you can use the remote to navigate .There are 3 ways to connect the Firestick with the Wi-Fi. You can select any one of them.

See All Network
Join Network using WPS (button)
Join Network using WPS (PIN)
Add Other Network

See All Network-

Firstly, All the Wi-Fi networks accessible at you location.
Further , Select your home Wi-Fi and hit on connect option.
Moreover it essential your Wi-Fi password. Once you connected to the home Wi-Fi or Bros extender setup Wi-Fi, you can start using your Firestick online.

Connect the Network using WPS (button)–

In Addition, By using this option on your Amazon Firestick menu, you have to press the physical button.
On the Bros Trend AC1200 Extender you will find the WPS button on the front side marked as “WPS”.
Furthermore, In this method you don’t have to put any Wi-Fi password manually. The Firestick collect the required information to connect automatically.